SCR SYSTEM SERIES · PART 10

EMITEC UDS 2.5 and UDA 2: Identifying Historical DAF and MAN Dosing Platforms

Historical aftermarket catalogue identification for EMITEC UDS 2.5 and UDA 2, with catalogue examples and reference-led enquiry checks.

Prepared by Best Growth (BG) · Sources checked 4 November 2026 · Historical aftermarket catalogue identification

Published

The historical labels UDS 2.5 and UDA 2 refer to different aftermarket catalogue families. They should not be merged into one “EMITEC pump,” and a historical supplier label should not be treated as proof of current corporate supply responsibility.

The strongest application evidence used here is a manufacturer's own aftermarket catalogue. It supports the following limited cross-reference, not a complete original-vehicle fitment database.

Family in catalogue Application classification OE examples
EMITEC UDS 2.5 DAF Euro V 1409391; 1705244; 5273338
EMITEC UDA 2 MAN Euro VI 81154036146; 81154036134

Source: rema.germany supply-unit catalogue, p.2.

Keep the vehicle, dosing family, component and complete reference separate.
Figure 1. BG editorial identity diagram. A shared supplier name is not a parts-interchangeability rule.

Why brand-only searches are risky

DAF and MAN appear under more than one supplier/system entry in the same catalogue. Searching only for the vehicle brand and “AdBlue pump” can therefore produce technically unrelated candidates. Emission stage narrows the search but does not uniquely identify the component.

A useful record keeps three numbers separate: the original vehicle manufacturer's reference, any supplier number physically present on the unit, and the aftermarket offered reference. If a seller proposes a supersession, ask for its documented direction and scope rather than silently replacing the old number in the record.

What about Grundfos labels?

Where an old unit or workshop record uses Grundfos alongside EMITEC, retain the exact wording and photograph the label. The sources cited here do not establish a complete corporate or manufacturing history connecting every such number. This article therefore does not use the names as automatic synonyms or infer a supply chain from a listing title.

Similarly, EMITEC's more recent technical publications discuss catalyst and thermal-management developments. Those documents should not be borrowed as a hydraulic repair manual for a historical UDS or UDA unit. EMITEC, Low-NOx technology paper

A complaint should become a testable description

Report received Information still needed
“No urea injection” Was dosing commanded, and how was actual delivery assessed?
“Pump cannot hold pressure” Which family, routine, measurement point and limit?
“Electronic failure” Exact diagnostic code and identified circuit/module
“Same housing, different number” Documented reference relationship and configuration

These are editorial questions. This article does not publish UDS/UDA pressure limits, valve-driving signals, pinouts or disassembly procedures because a matching original service document has not been established.

Verified BG catalogue examples

BG publishes BG203038 / OE 1409391. Its pump catalogue also lists BG2039007 / 81.15403.6134. Ask BG to confirm the exact offered reference for the original unit; neither listing establishes all-model compatibility.

Can the article serve as a full UDS/UDA overhaul manual? No. Its purpose is accurate identification and enquiry preparation. A detailed hydraulic service article requires an authenticated version-specific procedure before publication.

WhatsApp