

NOx Sensor 12676706
BG NOx sensor for GMSilverado 2500 HD 6.6L Duramax,OE 12676706,12V urea/SCR system.
- BG Part Number
- 990642
- Category
- NOx Sensors
- Application
- Silverado 2500 HD 6.6L Duramax
- Voltage
- 12V
- Vehicle Manufacturer
- GM
- 12676706
- SNS318· cross
Product Description
Vehicle manufacturer names, logos and OE reference numbers are used for identification and compatibility purposes only. BEST GROWTH products are independent aftermarket products and are not manufactured, sponsored or endorsed by the respective vehicle manufacturers.
BG 990642 (OE 12676706): function on the vehicle
NOx Sensor 12676706 is supplied by BEST GROWTH under part number 990642, cross-referenced to OE 12676706, as a direct-fit aftermarket nox sensors. In service it acts as the closed-loop feedback element of the SCR circuit: it tells the controller how much NOx is still leaving the catalyst, so dosing is trimmed up or down instead of running to a fixed map.
BG 990642 is built to the position defined by its OE application on a 12V electrical system on the platform from GM. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.
Cable length and connector keying are part of the specification. A cell with correct electrical output but the wrong lead length will not route to the OE bracket.
Fitment for GM and OE cross reference
BG 990642 replaces 2 OE references: 12676706 and SNS318, covering cross applications. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.
Recorded vehicle coverage for 990642 includes GM, typically on Silverado 2500 HD 6.6L Duramax. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.
Where several OE numbers appear against one BG reference, they are supersessions or regional variants of the same specification. Ordering by 12676706 and quoting the number on your part lets our technical team confirm the variant before despatch.
Symptoms that lead to replacing 12676706
These complaints bring a vehicle in with the GM nox sensors under suspicion. None of them prove BG 990642 has failed on its own, which is why the checks below matter before a replacement is ordered.
- no communication with the sensor control module after a cold start
- sensor value frozen at a fixed number once the exhaust warms up
- dosing shut-down after a few minutes of steady-state running
- upstream and downstream values reading almost identically under load
- intermittent fault that clears after the engine cools and returns when hot
Checks before fitting BG 990642
Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new nox sensors is fitted.
- Inspect the harness for heat damage and the connector for moisture and green corrosion.
- Check for exhaust leaks ahead of the sensor boss; a diluted sample reads low NOx.
- Read the sensor's own dew-point release time — a cell that never heats is a supply or module fault.
- Verify DEF concentration with a refractometer before blaming the measuring cell.
- Check for a pending software or parameter update for the sensor control module on that platform.
Quality, packaging and ordering 990642
BG 990642 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing on the 12V specification. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.
Send OE 12676706 or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.
Frequently asked questions
- Does BG 990642 replace OE 12676706?
- Yes. BG 990642 is listed against 12676706 and SNS318. Confirm the number printed on the removed part and any manufacturer supersession before ordering.
- Which vehicles does BG 990642 fit?
- Recorded coverage includes GM. It is supplied as a direct-fit aftermarket nox sensors on 12V systems. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.
- Does this fault code always mean the nox sensors has failed?
- No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 990642.


