Does BG 205118 replace OE YM3000-1205580 DH?

Yes. BG 205118 is listed against YM3000-1205580 DH. Confirm the number printed on the removed part and any manufacturer supersession before ordering.

Which vehicles does BG 205118 fit?

Recorded coverage includes Yuchai. It is supplied as a direct-fit aftermarket def dosing modules. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.

Does this fault code always mean the def dosing modules has failed?

No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 205118.

205118

Urea (AdBlue) Dosing Module for YUCHAI – OE YM3000-1205580 DH

Urea (AdBlue) Dosing Module (OE YM3000-1205580 DH) for YUCHAI SCR/AdBlue aftertreatment systems.

BG Part Number: 205118
Category: DEF Dosing Modules
Application: YUCHAI
Vehicle Manufacturer: YUCHAI

OE Cross References

YM3000-1205580 DH

Review Inquiry Basket Ask a Technical Question

Product Description

This urea (adblue) dosing module is designed as a direct-fit replacement for YUCHAI. It meters precise doses of AdBlue / Diesel Exhaust Fluid (DEF) into the exhaust stream as part of the vehicle's Selective Catalytic Reduction (SCR) aftertreatment system, converting NOx emissions into harmless nitrogen and water vapor to help the engine meet its emission standard. Primary OE reference number: YM3000-1205580 DH. Manufactured by BG Brand (Wenzhou Best Growth IE Co., Ltd.) to OE-equivalent fit, form and function, this part is tested for reliable sealing and dosing accuracy, offering fleets, workshops and parts distributors a quality-assured alternative to OEM pricing for scheduled SCR system maintenance and repair.

Vehicle manufacturer names, logos and OE reference numbers are used for identification and compatibility purposes only. BEST GROWTH products are independent aftermarket products and are not manufactured, sponsored or endorsed by the respective vehicle manufacturers.

BG 205118 (OE YM3000-1205580 DH): function on the vehicle

Urea (AdBlue) Dosing Module for YUCHAI – OE YM3000-1205580 DH is supplied by BEST GROWTH under part number 205118, cross-referenced to OE YM3000-1205580 DH, as a direct-fit aftermarket def dosing modules. In service it is the final actuator of the SCR loop: whatever the controller calculates from the NOx signal is only delivered as accurately as this module sprays it.

BG 205118 is built to the position defined by its OE application on the platform from Yuchai. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.

Seal and gasket condition at the exhaust interface is part of the repair: a leaking joint cools the spray zone and promotes crystallisation.

Fitment for Yuchai and OE cross reference

BG 205118 replaces 1 OE reference: YM3000-1205580 DH. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.

Recorded vehicle coverage for 205118 includes Yuchai, typically on YUCHAI. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.

Quote the number printed on your part with the engine code when you enquire; a single-reference part is the most common source of ordering errors when a platform received a mid-life update.

Symptoms that lead to replacing YM3000-1205580 DH

These complaints bring a vehicle in with the Yuchai def dosing modules under suspicion. None of them prove BG 205118 has failed on its own, which is why the checks below matter before a replacement is ordered.

deposits inside the mixer restricting exhaust flow
white urea crystallisation around the dosing point or mixer
low dosing pressure or pressure-build-up fault codes
SCR low-conversion codes with confirmed in-spec DEF
coolant or DEF weeping at the module interface

Checks before fitting BG 205118

Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new def dosing modules is fitted.

Check the cooling circuit or heat shield is intact before fitting a replacement.
Clean or replace the mixer if crystallisation is already established, or the new module will block too.
Verify commanded versus actual dosing pressure during an active dose, not at rest.
Run a quantity test and inspect the spray pattern rather than judging the injector by appearance.
Confirm the purge cycle completes at shutdown; skipped purges cause freeze damage.

Quality, packaging and ordering 205118

BG 205118 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.

Send OE YM3000-1205580 DH or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.

Frequently asked questions

Does BG 205118 replace OE YM3000-1205580 DH?: Yes. BG 205118 is listed against YM3000-1205580 DH. Confirm the number printed on the removed part and any manufacturer supersession before ordering.
Which vehicles does BG 205118 fit?: Recorded coverage includes Yuchai. It is supplied as a direct-fit aftermarket def dosing modules. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.
Does this fault code always mean the def dosing modules has failed?: No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 205118.