Urea (AdBlue) Dosing Module for Volvo FH / FM; Renault Trucks T / C / K Series – OE 7422588556
205112

Urea (AdBlue) Dosing Module for Volvo FH / FM; Renault Trucks T / C / K Series – OE 7422588556

Urea (AdBlue) Dosing Module (OE 7422588556) for Volvo FH / FM; Renault Trucks T / C / K Series SCR/AdBlue aftertreatment systems. Cross-referenced with 3 alternate OE numbers.

BG Part Number
205112
Category
DEF Dosing Modules
Application
Volvo FH / FM; Renault Trucks T / C / K Series
Vehicle Manufacturer
Volvo / Renault Trucks
Applications
OE Cross References
  • 7422588556
  • 7421679307
  • 21679307
  • 22588556

Product Description

This urea (adblue) dosing module is designed as a direct-fit replacement for Volvo FH / FM; Renault Trucks T / C / K Series. It meters precise doses of AdBlue / Diesel Exhaust Fluid (DEF) into the exhaust stream as part of the vehicle's Selective Catalytic Reduction (SCR) aftertreatment system, converting NOx emissions into harmless nitrogen and water vapor to help the engine meet its emission standard. Primary OE reference number: 7422588556. It also cross-references to OE/aftermarket numbers including 7421679307, 21679307, 22588556. Manufactured by BG Brand (Wenzhou Best Growth IE Co., Ltd.) to OE-equivalent fit, form and function, this part is tested for reliable sealing and dosing accuracy, offering fleets, workshops and parts distributors a quality-assured alternative to OEM pricing for scheduled SCR system maintenance and repair.

Vehicle manufacturer names, logos and OE reference numbers are used for identification and compatibility purposes only. BEST GROWTH products are independent aftermarket products and are not manufactured, sponsored or endorsed by the respective vehicle manufacturers.

BG 205112 (OE 7422588556): function on the vehicle

Urea (AdBlue) Dosing Module for Volvo FH / FM; Renault Trucks T / C / K Series – OE 7422588556 is supplied by BEST GROWTH under part number 205112, cross-referenced to OE 7422588556, as a direct-fit aftermarket def dosing modules. In service it meters DEF under pump pressure through a solenoid injector into the hot exhaust pipe, with a cooling circuit or heat shield keeping the injector body below its thermal limit between doses.

BG 205112 is built to the position defined by its OE application in truck service on platforms from Volvo and Renault Trucks. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.

Seal and gasket condition at the exhaust interface is part of the repair: a leaking joint cools the spray zone and promotes crystallisation.

Fitment for Volvo and Renault Trucks and OE cross reference

BG 205112 replaces 4 OE references: 7422588556, 7421679307, 21679307 and 22588556. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.

Recorded vehicle coverage for 205112 includes Volvo and Renault Trucks, typically on Volvo FH / FM; Renault Trucks T / C / K Series. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.

Where several OE numbers appear against one BG reference, they are supersessions or regional variants of the same specification. Ordering by 7422588556 and quoting the number on your part lets our technical team confirm the variant before despatch.

Symptoms that lead to replacing 7422588556

These complaints bring a vehicle in with the Volvo and Renault Trucks def dosing modules under suspicion. None of them prove BG 205112 has failed on its own, which is why the checks below matter before a replacement is ordered.

  • deposits inside the mixer restricting exhaust flow
  • white urea crystallisation around the dosing point or mixer
  • low dosing pressure or pressure-build-up fault codes
  • SCR low-conversion codes with confirmed in-spec DEF
  • coolant or DEF weeping at the module interface

Checks before fitting BG 205112

Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new def dosing modules is fitted.

  • Check the cooling circuit or heat shield is intact before fitting a replacement.
  • Clean or replace the mixer if crystallisation is already established, or the new module will block too.
  • Verify commanded versus actual dosing pressure during an active dose, not at rest.
  • Run a quantity test and inspect the spray pattern rather than judging the injector by appearance.
  • Confirm the purge cycle completes at shutdown; skipped purges cause freeze damage.

Quality, packaging and ordering 205112

BG 205112 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.

Send OE 7422588556 or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.

Frequently asked questions

Does BG 205112 replace OE 7422588556?
Yes. BG 205112 is listed against 7422588556, 7421679307, 21679307 and 22588556. Confirm the number printed on the removed part and any manufacturer supersession before ordering.
Which vehicles does BG 205112 fit?
Recorded coverage includes Volvo and Renault Trucks. It is supplied as a direct-fit aftermarket def dosing modules. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.
Does this fault code always mean the def dosing modules has failed?
No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 205112.

Related References

WhatsApp