Urea (AdBlue) Dosing Module for Iveco Truck Case / New Holland Tractor – OE 5801755285
205011

Urea (AdBlue) Dosing Module for Iveco Truck Case / New Holland Tractor – OE 5801755285

Urea (AdBlue) Dosing Module (OE 5801755285) for Iveco Truck Case / New Holland Tractor SCR/AdBlue aftertreatment systems. Cross-referenced with 5 alternate OE numbers.

BG Part Number
205011
Category
DEF Dosing Modules
Application
Iveco Truck Case|New Holland Tractor
Vehicle Manufacturer
Iveco|Case New Holland
OE Cross References
  • 5801755285
  • 47537803
  • 504381880
  • 5801755285
  • 22391563
  • 0 444 043 022

Product Description

This urea (adblue) dosing module is designed as a direct-fit replacement for Iveco Truck Case / New Holland Tractor. It meters precise doses of AdBlue / Diesel Exhaust Fluid (DEF) into the exhaust stream as part of the vehicle's Selective Catalytic Reduction (SCR) aftertreatment system, converting NOx emissions into harmless nitrogen and water vapor to help the engine meet its emission standard. Primary OE reference number: 5801755285. It also cross-references to OE/aftermarket numbers including 47537803, 504381880, 5801755285, 22391563, 0 444 043 022. Manufactured by BG Brand (Wenzhou Best Growth IE Co., Ltd.) to OE-equivalent fit, form and function, this part is tested for reliable sealing and dosing accuracy, offering fleets, workshops and parts distributors a quality-assured alternative to OEM pricing for scheduled SCR system maintenance and repair.

Vehicle manufacturer names, logos and OE reference numbers are used for identification and compatibility purposes only. BEST GROWTH products are independent aftermarket products and are not manufactured, sponsored or endorsed by the respective vehicle manufacturers.

BG 205011 (OE 5801755285): function on the vehicle

Urea (AdBlue) Dosing Module for Iveco Truck Case / New Holland Tractor – OE 5801755285 is supplied by BEST GROWTH under part number 205011, cross-referenced to OE 5801755285, as a direct-fit aftermarket def dosing modules. In service it atomizes diesel exhaust fluid into the exhaust stream ahead of the SCR catalyst. Spray quality, dosing quantity and purge behaviour decide whether urea converts to ammonia or builds solid deposits.

BG 205011 is built to the position defined by its OE application in truck and agricultural machinery service on platforms from IVECO and Case new holland. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.

Seal and gasket condition at the exhaust interface is part of the repair: a leaking joint cools the spray zone and promotes crystallisation.

Fitment for IVECO and Case new holland and OE cross reference

BG 205011 replaces 6 OE references: 5801755285, 47537803, 504381880, 5801755285, 22391563 and 0 444 043 022. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.

Recorded vehicle coverage for 205011 includes IVECO and Case new holland, typically on Iveco Truck Case|New Holland Tractor. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.

Where several OE numbers appear against one BG reference, they are supersessions or regional variants of the same specification. Ordering by 5801755285 and quoting the number on your part lets our technical team confirm the variant before despatch.

Symptoms that lead to replacing 5801755285

These complaints bring a vehicle in with the IVECO and Case new holland def dosing modules under suspicion. None of them prove BG 205011 has failed on its own, which is why the checks below matter before a replacement is ordered.

  • deposits inside the mixer restricting exhaust flow
  • white urea crystallisation around the dosing point or mixer
  • low dosing pressure or pressure-build-up fault codes
  • SCR low-conversion codes with confirmed in-spec DEF
  • coolant or DEF weeping at the module interface

Checks before fitting BG 205011

Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new def dosing modules is fitted.

  • Check the cooling circuit or heat shield is intact before fitting a replacement.
  • Clean or replace the mixer if crystallisation is already established, or the new module will block too.
  • Verify commanded versus actual dosing pressure during an active dose, not at rest.
  • Run a quantity test and inspect the spray pattern rather than judging the injector by appearance.
  • Confirm the purge cycle completes at shutdown; skipped purges cause freeze damage.

Quality, packaging and ordering 205011

BG 205011 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.

Send OE 5801755285 or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.

Frequently asked questions

Does BG 205011 replace OE 5801755285?
Yes. BG 205011 is listed against 5801755285, 47537803, 504381880, 5801755285, 22391563 and 0 444 043 022. Confirm the number printed on the removed part and any manufacturer supersession before ordering.
Which vehicles does BG 205011 fit?
Recorded coverage includes IVECO and Case new holland. It is supplied as a direct-fit aftermarket def dosing modules. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.
Does this fault code always mean the def dosing modules has failed?
No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 205011.

Related References

WhatsApp