Does BG 205001 replace OE 1819 798?

Yes. BG 205001 is listed against 1819 798. Confirm the number printed on the removed part and any manufacturer supersession before ordering.

Which vehicles does BG 205001 fit?

Recorded coverage includes DAF. It is supplied as a direct-fit aftermarket def dosing modules. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.

Does this fault code always mean the def dosing modules has failed?

No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 205001.

205001

Urea (AdBlue) Dosing Module for DAF CF / XF Truck – OE 1819 798

Urea (AdBlue) Dosing Module (OE 1819 798) for DAF CF / XF Truck SCR/AdBlue aftertreatment systems.

BG Part Number: 205001
Category: DEF Dosing Modules
Application: DAF CF|XF Truck
Vehicle Manufacturer: DAF

Applications

Truck

OE Cross References

1819 798

Review Inquiry Basket Ask a Technical Question

Product Description

This urea (adblue) dosing module is designed as a direct-fit replacement for DAF CF / XF Truck. It meters precise doses of AdBlue / Diesel Exhaust Fluid (DEF) into the exhaust stream as part of the vehicle's Selective Catalytic Reduction (SCR) aftertreatment system, converting NOx emissions into harmless nitrogen and water vapor to help the engine meet its emission standard. Primary OE reference number: 1819 798. Manufactured by BG Brand (Wenzhou Best Growth IE Co., Ltd.) to OE-equivalent fit, form and function, this part is tested for reliable sealing and dosing accuracy, offering fleets, workshops and parts distributors a quality-assured alternative to OEM pricing for scheduled SCR system maintenance and repair.

Vehicle manufacturer names, logos and OE reference numbers are used for identification and compatibility purposes only. BEST GROWTH products are independent aftermarket products and are not manufactured, sponsored or endorsed by the respective vehicle manufacturers.

BG 205001 (OE 1819 798): function on the vehicle

Urea (AdBlue) Dosing Module for DAF CF / XF Truck – OE 1819 798 is supplied by BEST GROWTH under part number 205001, cross-referenced to OE 1819 798, as a direct-fit aftermarket def dosing modules. In service it is the final actuator of the SCR loop: whatever the controller calculates from the NOx signal is only delivered as accurately as this module sprays it.

BG 205001 is built to the position defined by its OE application in truck service on the platform from DAF. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.

Seal and gasket condition at the exhaust interface is part of the repair: a leaking joint cools the spray zone and promotes crystallisation.

Fitment for DAF and OE cross reference

BG 205001 replaces 1 OE reference: 1819 798. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.

Recorded vehicle coverage for 205001 includes DAF, typically on DAF CF|XF Truck. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.

Quote the number printed on your part with the engine code when you enquire; a single-reference part is the most common source of ordering errors when a platform received a mid-life update.

Symptoms that lead to replacing 1819 798

These complaints bring a vehicle in with the DAF def dosing modules under suspicion. None of them prove BG 205001 has failed on its own, which is why the checks below matter before a replacement is ordered.

coolant or DEF weeping at the module interface
audible ticking absent during a commanded dose
deposits inside the mixer restricting exhaust flow
white urea crystallisation around the dosing point or mixer
low dosing pressure or pressure-build-up fault codes

Checks before fitting BG 205001

Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new def dosing modules is fitted.

Verify commanded versus actual dosing pressure during an active dose, not at rest.
Run a quantity test and inspect the spray pattern rather than judging the injector by appearance.
Confirm the purge cycle completes at shutdown; skipped purges cause freeze damage.
Review exhaust temperature history — cold-side dosing wets the wall and forms deposits.
Check the cooling circuit or heat shield is intact before fitting a replacement.

Quality, packaging and ordering 205001

BG 205001 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.

Send OE 1819 798 or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.

Frequently asked questions

Does BG 205001 replace OE 1819 798?: Yes. BG 205001 is listed against 1819 798. Confirm the number printed on the removed part and any manufacturer supersession before ordering.
Which vehicles does BG 205001 fit?: Recorded coverage includes DAF. It is supplied as a direct-fit aftermarket def dosing modules. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.
Does this fault code always mean the def dosing modules has failed?: No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 205001.