Urea (AdBlue) Dosing Module for Caterpillar / Perkins Engine Off-road Equipment – OE 0444043115
205002

Urea (AdBlue) Dosing Module for Caterpillar / Perkins Engine Off-road Equipment – OE 0444043115

Urea (AdBlue) Dosing Module (OE 0444043115) for Caterpillar / Perkins Engine Off-road Equipment SCR/AdBlue aftertreatment systems. Cross-referenced with 3 alternate OE numbers.

BG Part Number
205002
Category
DEF Dosing Modules
Application
Caterpillar|Perkins Engine Off-road Equipment
Vehicle Manufacturer
Bosch|CAT|Perkins
OE Cross References
  • 0444043115
  • 0 444 043 046
  • RE 55 562 6
  • 424-4205-00

Product Description

This urea (adblue) dosing module is designed as a direct-fit replacement for Caterpillar / Perkins Engine Off-road Equipment. It meters precise doses of AdBlue / Diesel Exhaust Fluid (DEF) into the exhaust stream as part of the vehicle's Selective Catalytic Reduction (SCR) aftertreatment system, converting NOx emissions into harmless nitrogen and water vapor to help the engine meet its emission standard. Primary OE reference number: 0444043115. It also cross-references to OE/aftermarket numbers including 0 444 043 046, RE 55 562 6, 424-4205-00. Manufactured by BG Brand (Wenzhou Best Growth IE Co., Ltd.) to OE-equivalent fit, form and function, this part is tested for reliable sealing and dosing accuracy, offering fleets, workshops and parts distributors a quality-assured alternative to OEM pricing for scheduled SCR system maintenance and repair.

Vehicle manufacturer names, logos and OE reference numbers are used for identification and compatibility purposes only. BEST GROWTH products are independent aftermarket products and are not manufactured, sponsored or endorsed by the respective vehicle manufacturers.

BG 205002 (OE 0444043115): function on the vehicle

Urea (AdBlue) Dosing Module for Caterpillar / Perkins Engine Off-road Equipment – OE 0444043115 is supplied by BEST GROWTH under part number 205002, cross-referenced to OE 0444043115, as a direct-fit aftermarket def dosing modules. In service it is the final actuator of the SCR loop: whatever the controller calculates from the NOx signal is only delivered as accurately as this module sprays it.

BG 205002 is built to the position defined by its OE application in construction equipment service on platforms from Bosch, Caterpillar and Perkins. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.

A dosing module rarely fails alone. Deposits are usually evidence of a temperature or mixing problem that will destroy the replacement unless it is corrected.

Fitment for Bosch, Caterpillar and Perkins and OE cross reference

BG 205002 replaces 4 OE references: 0444043115, 0 444 043 046, RE 55 562 6 and 424-4205-00. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.

Recorded vehicle coverage for 205002 includes Bosch, Caterpillar and Perkins, typically on Caterpillar|Perkins Engine Off-road Equipment. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.

Where several OE numbers appear against one BG reference, they are supersessions or regional variants of the same specification. Ordering by 0444043115 and quoting the number on your part lets our technical team confirm the variant before despatch.

Symptoms that lead to replacing 0444043115

These complaints bring a vehicle in with the Bosch and Caterpillar def dosing modules under suspicion. None of them prove BG 205002 has failed on its own, which is why the checks below matter before a replacement is ordered.

  • white urea crystallisation around the dosing point or mixer
  • low dosing pressure or pressure-build-up fault codes
  • SCR low-conversion codes with confirmed in-spec DEF
  • coolant or DEF weeping at the module interface
  • audible ticking absent during a commanded dose

Checks before fitting BG 205002

Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new def dosing modules is fitted.

  • Clean or replace the mixer if crystallisation is already established, or the new module will block too.
  • Verify commanded versus actual dosing pressure during an active dose, not at rest.
  • Run a quantity test and inspect the spray pattern rather than judging the injector by appearance.
  • Confirm the purge cycle completes at shutdown; skipped purges cause freeze damage.
  • Review exhaust temperature history — cold-side dosing wets the wall and forms deposits.

Quality, packaging and ordering 205002

BG 205002 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.

Send OE 0444043115 or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.

Frequently asked questions

Does BG 205002 replace OE 0444043115?
Yes. BG 205002 is listed against 0444043115, 0 444 043 046, RE 55 562 6 and 424-4205-00. Confirm the number printed on the removed part and any manufacturer supersession before ordering.
Which vehicles does BG 205002 fit?
Recorded coverage includes Bosch, Caterpillar and Perkins. It is supplied as a direct-fit aftermarket def dosing modules. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.
Does this fault code always mean the def dosing modules has failed?
No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 205002.

Related References

WhatsApp