Urea (AdBlue) Dosing Module for Renault Trucks Volvo FH / FM – OE 0444023018

BG 205029 (OE 0444023018): function on the vehicle

Urea (AdBlue) Dosing Module for Renault Trucks Volvo FH / FM – OE 0444023018 is supplied by BEST GROWTH under part number 205029, cross-referenced to OE 0444023018, as a direct-fit aftermarket def dosing modules. In service it atomizes diesel exhaust fluid into the exhaust stream ahead of the SCR catalyst. Spray quality, dosing quantity and purge behaviour decide whether urea converts to ammonia or builds solid deposits.

BG 205029 is built to the position defined by its OE application in truck service on platforms from Renault Trucks and Volvo. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.

A dosing module rarely fails alone. Deposits are usually evidence of a temperature or mixing problem that will destroy the replacement unless it is corrected.

Fitment for Renault Trucks and Volvo and OE cross reference

BG 205029 replaces 6 OE references: 0444023018, 7420908956, 0 444 023 017, 74 20 766 866, 20908937 and 0444023008. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.

Recorded vehicle coverage for 205029 includes Renault Trucks and Volvo, typically on Renault Trucks Volvo FH|FM. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.

Where several OE numbers appear against one BG reference, they are supersessions or regional variants of the same specification. Ordering by 0444023018 and quoting the number on your part lets our technical team confirm the variant before despatch.

Symptoms that lead to replacing 0444023018

These complaints bring a vehicle in with the Renault Trucks and Volvo def dosing modules under suspicion. None of them prove BG 205029 has failed on its own, which is why the checks below matter before a replacement is ordered.

• SCR low-conversion codes with confirmed in-spec DEF
• coolant or DEF weeping at the module interface
• audible ticking absent during a commanded dose
• deposits inside the mixer restricting exhaust flow
• white urea crystallisation around the dosing point or mixer

Checks before fitting BG 205029

Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new def dosing modules is fitted.

• Clean or replace the mixer if crystallisation is already established, or the new module will block too.
• Verify commanded versus actual dosing pressure during an active dose, not at rest.
• Run a quantity test and inspect the spray pattern rather than judging the injector by appearance.
• Confirm the purge cycle completes at shutdown; skipped purges cause freeze damage.
• Review exhaust temperature history — cold-side dosing wets the wall and forms deposits.

Quality, packaging and ordering 205029

BG 205029 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.

Send OE 0444023018 or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.

Frequently asked questions

Does BG 205029 replace OE 0444023018?

Yes. BG 205029 is listed against 0444023018, 7420908956, 0 444 023 017, 74 20 766 866, 20908937 and 0444023008. Confirm the number printed on the removed part and any manufacturer supersession before ordering.

Which vehicles does BG 205029 fit?

Recorded coverage includes Renault Trucks and Volvo. It is supplied as a direct-fit aftermarket def dosing modules. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.

Does this fault code always mean the def dosing modules has failed?

No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 205029.