

NOx Sensor 2929984
BG NOx sensor for IVECO Stralis / EuroCargo, OE 2929984, 24V urea/SCR system.
- BG Part Number
- 990554
- Category
- NOx Sensors
- Application
- Stralis / EuroCargo
- Voltage
- 24V
- Vehicle Manufacturer
- IVECO
- 2929984
Product Description
Vehicle manufacturer names, logos and OE reference numbers are used for identification and compatibility purposes only. BEST GROWTH products are independent aftermarket products and are not manufactured, sponsored or endorsed by the respective vehicle manufacturers.
BG 990554 (OE 2929984): function on the vehicle
NOx Sensor 2929984 is supplied by BEST GROWTH under part number 990554, cross-referenced to OE 2929984, as a direct-fit aftermarket nox sensors. In service it measures nitrogen-oxide concentration and residual oxygen in the exhaust stream and reports both values to the aftertreatment controller over the vehicle data bus. Upstream and downstream readings together set DEF dosing quantity and score SCR conversion efficiency.
BG 990554 is built to the position defined by its OE application on a 24V electrical system in truck service on the platform from IVECO. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.
Cable length and connector keying are part of the specification. A cell with correct electrical output but the wrong lead length will not route to the OE bracket.
Fitment for IVECO and OE cross reference
BG 990554 replaces 1 OE reference: 2929984. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.
Recorded vehicle coverage for 990554 includes IVECO, typically on Stralis / EuroCargo. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.
Quote the number printed on your part with the engine code when you enquire; a single-reference part is the most common source of ordering errors when a platform received a mid-life update.
Symptoms that lead to replacing 2929984
These complaints bring a vehicle in with the IVECO nox sensors under suspicion. None of them prove BG 990554 has failed on its own, which is why the checks below matter before a replacement is ordered.
- no communication with the sensor control module after a cold start
- sensor value frozen at a fixed number once the exhaust warms up
- dosing shut-down after a few minutes of steady-state running
- upstream and downstream values reading almost identically under load
- intermittent fault that clears after the engine cools and returns when hot
Checks before fitting BG 990554
Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new nox sensors is fitted.
- Read the sensor's own dew-point release time — a cell that never heats is a supply or module fault.
- Verify DEF concentration with a refractometer before blaming the measuring cell.
- Check for a pending software or parameter update for the sensor control module on that platform.
- After fitting, run the manufacturer's adaptation or relearn so stored efficiency counters reset.
- Compare upstream and downstream NOx readings warmed and under load — idle values prove nothing.
Quality, packaging and ordering 990554
BG 990554 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing on the 24V specification. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.
Send OE 2929984 or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.
Frequently asked questions
- Does BG 990554 replace OE 2929984?
- Yes. BG 990554 is listed against 2929984. Confirm the number printed on the removed part and any manufacturer supersession before ordering.
- Which vehicles does BG 990554 fit?
- Recorded coverage includes IVECO. It is supplied as a direct-fit aftermarket nox sensors on 24V systems. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.
- Does this fault code always mean the nox sensors has failed?
- No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 990554.


