
EGR Gas Temperature Sensor — Fit for Volvo and Mack, OE 21164790
BG 990810 is an EGR gas temperature sensor with OE 21164790 for selected Volvo D11/D13 and Mack MP7/MP8 diesel engines.
- BG Part Number
- 990810
- Category
- EGT Sensors
- Application
- Fit for selected Volvo D11/D13 and Mack MP7/MP8 diesel applications with matching OE. Confirm by VIN and original sensor configuration.
- 21164790· Volvo
- 7421164790· Volvo
Product Description
Vehicle manufacturer names, logos and OE reference numbers are used for identification and compatibility purposes only. BEST GROWTH products are independent aftermarket products and are not manufactured, sponsored or endorsed by the respective vehicle manufacturers.
How to confirm BG 990810 fits your vehicle
What our catalogue states
- 2 OE / cross reference numbers listed above (main: 21164790, Volvo).
- Listed application: Fit for selected Volvo D11/D13 and Mack MP7/MP8 diesel applications with matching OE. Confirm by VIN and original sensor configuration..
What to check before ordering
- The full part number printed on your original part label, including any suffix letters — a superseded or later number can differ in connector or software.
- Supply voltage (12 V or 24 V) of the vehicle or machine.
- Connector shape, pin count and cable length — please send clear photos of the connector and label with your inquiry.
- Vehicle model, engine and build year. If you want to share a VIN, send it privately in the inquiry form or by email, not in a public message.
An OE number match is the starting point, not a guarantee: the same vehicle family can use different parts by engine, emission level and production date. Our team checks your details against the reference before quoting. Guides: identify a part by OE number.
BG 990810 (OE 21164790): function on the vehicle
EGR Gas Temperature Sensor — Fit for Volvo and Mack, OE 21164790 is supplied by BEST GROWTH under part number 990810, cross-referenced to OE 21164790, as a direct-fit aftermarket egt sensors. In service it reports exhaust-gas temperature at a defined position so the controller can protect the turbocharger and catalysts, authorise DPF regeneration and confirm the SCR operating window.
BG 990810 is built to the position defined by its OE application on platforms from Volvo and Mack. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.
Probe length and thread size distinguish otherwise identical references; the wrong insertion depth reads low and delays regeneration.
Fitment for Volvo and Mack and OE cross reference
BG 990810 replaces 2 OE references: 21164790 and 7421164790, covering Volvo applications. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.
Recorded vehicle coverage for 990810 includes Volvo and Mack, typically on Fit for selected Volvo D11/D13 and Mack MP7/MP8 diesel applications with matching OE. Confirm by VIN and original sensor configuration.. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.
Where several OE numbers appear against one BG reference, they are supersessions or regional variants of the same specification. Ordering by 21164790 and quoting the number on your part lets our technical team confirm the variant before despatch.
Symptoms that lead to replacing 21164790
These complaints bring a vehicle in with the Volvo and Mack egt sensors under suspicion. None of them prove BG 990810 has failed on its own, which is why the checks below matter before a replacement is ordered.
- implausible-temperature or signal-range fault codes
- unexpected derate during or after a regeneration
- value stuck at ambient after a warm restart
- temperature channels disagreeing at cold key-on
- regeneration blocked or aborting early
Checks before fitting BG 990810
Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new egt sensors is fitted.
- Inspect the probe tip for soot packing and the cable for heat and abrasion damage.
- Confirm the sensor sits in the correct boss at the correct insertion depth for its position.
- Route and clip the new cable exactly as OE — most repeat failures are chafe or heat damage.
- Compare all EGT channels at cold key-on; they should read within a few degrees of each other.
- Check resistance against the full temperature curve, not a single point.
Quality, packaging and ordering 990810
BG 990810 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.
Send OE 21164790 or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.
Frequently asked questions
- Does BG 990810 replace OE 21164790?
- Yes. BG 990810 is listed against 21164790 and 7421164790. Confirm the number printed on the removed part and any manufacturer supersession before ordering.
- Which vehicles does BG 990810 fit?
- Recorded coverage includes Volvo and Mack. It is supplied as a direct-fit aftermarket egt sensors. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.
- Does this fault code always mean the egt sensors has failed?
- No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 990810.
Related References



