Urea Pump Assembly 81154036150

BG 203208 (OE 81154036150): function on the vehicle

Urea Pump Assembly 81154036150 is supplied by BEST GROWTH under part number 203208, cross-referenced to OE 81154036150, as a direct-fit aftermarket def pumps. In service it is the pressure source of the whole DEF circuit, combining pump, filter, pressure sensor and reverting valve in one serviceable assembly.

BG 203208 is built to the position defined by its OE application in truck and industrial engine service on the platform from MAN. Position, calibration and connector layout are part of the specification, so a part that physically fits is not automatically the correct part.

DEF quality is the single largest driver of pump life. Fitting a new pump into a contaminated tank simply repeats the failure.

Fitment for MAN and OE cross reference

BG 203208 replaces 4 OE references: 81154036150, 0444062012, 81154036150 and 2V3131113. Always confirm the number printed on the removed part, including any supersession issued by the vehicle manufacturer.

Recorded vehicle coverage for 203208 includes MAN, typically on MAN METEOR. Coverage lists are a starting point for identification, not a substitute for checking the OE number on the vehicle.

Where several OE numbers appear against one BG reference, they are supersessions or regional variants of the same specification. Ordering by 81154036150 and quoting the number on your part lets our technical team confirm the variant before despatch.

Symptoms that lead to replacing 81154036150

These complaints bring a vehicle in with the MAN def pumps under suspicion. None of them prove BG 203208 has failed on its own, which is why the checks below matter before a replacement is ordered.

• pressure too low or unable to build pressure
• long priming time after a tank refill
• frozen-line faults in cold-climate operation
• repeated dosing interruptions during a drive cycle
• pressure decay immediately after the pump stops

Checks before fitting BG 203208

Aftertreatment faults are usually system faults. Working through these checks prevents a repeat failure after the new def pumps is fitted.

• Verify heater circuit and coolant valve operation before winter service.
• Confirm DEF concentration with a refractometer; contaminated fluid destroys the pump.
• Check suction and pressure lines for kinks and crystallised blockage.
• Test pressure build-up time and decay against the manufacturer's limits.
• Inspect the DEF filter and tank strainer for contamination and crystallisation.

Quality, packaging and ordering 203208

BG 203208 is manufactured and tested to aftermarket replacement standards, with electrical, leakage and functional testing carried out before packing. Bulk and retail packaging, private-label cartons and customer-specific labelling are available for distributors and workshop groups.

Send OE 81154036150 or the number printed on your part, the engine code and the vehicle identification number with your enquiry, and our technical team will confirm the correct reference, current stock position and lead time before you commit to an order.

Frequently asked questions

Does BG 203208 replace OE 81154036150?

Yes. BG 203208 is listed against 81154036150, 0444062012, 81154036150 and 2V3131113. Confirm the number printed on the removed part and any manufacturer supersession before ordering.

Which vehicles does BG 203208 fit?

Recorded coverage includes MAN. It is supplied as a direct-fit aftermarket def pumps. Adaptation, reset or relearn procedures required by the vehicle manufacturer still apply after installation.

Does this fault code always mean the def pumps has failed?

No. Exhaust leaks, wiring and connector damage, reductant quality, dosing performance and upstream engine faults can all produce the same codes. Validate those inputs before replacing BG 203208.